Summary
Car 6 (Isack Hadjar) disqualified from Qualifying for breach of floor board regulations.
Explanation
Car 6, driven by Isack Hadjar, was disqualified from the Qualifying classifications after the Technical Delegate found that both left and right floor boards protruded 2mm beyond the allowed reference volume. The team did not dispute the finding, which constitutes a breach of Article C3.5.5 of the F1 Technical Regulations. As a result, the car was excluded from the Qualifying results.
Loading PDF…
Referenced regulations
FIA F1 Regulations - Article C3.5.5
C3.5.5 Floor Board “Floor Board” Bodywork must: a. lie in its entirety within RV-FLOOR-BOARD. b. have up to three sections in any X, Y and Z-Plane. Floor Board Aerodynamic Surfaces visible from the side must: c. rearward of X = 825, at any point, in any Z-Section have a: F i. normal with a positive X component. ii. tangent that forms an angle of at least 15 degrees to the X-Axis. d. contain no concave radius of curvature less than 100mm. Furthermore: e. compliance with (c) and (d) is not required within 35mm of up to three points, which must sit forward of X = 1100 and be no closer than 50mm to each other. F
C3.5.6 Floor Bib
Open regulation PDF
Pages 20 highlighted
More from Miami Grand Prix
View all →Processed at