No further action for Audi Revolut over covered components

Doc 29 - Covering of Components on Car 05 during FP2

2026 Mexico City Grand Prix

Published

Summary

The Technical Delegate referred Audi Revolut F1 Team to the stewards for covering components on Car 05 during FP2, but no further action was taken.

Explanation

The FIA Formula 1 Technical Delegate reported that the Audi Revolut F1 Team covered components on Car 05 during FP2, including a soft cover behind the front axle and a fully covered floor carried through the pit lane. These actions were referred to the stewards for potential non-compliance with Technical Regulation B3.3. The document is a referral notice, and no penalty or further action was imposed.

Full document

Scrollable preview inside the frame

Open in new tab

Loading PDF…

FIA F1 Regulations - Article C3.3
3.3 PU Manufacturers who fulfil the criteria described by Article 4 of this Appendix in year N, will be permitted additional specification upgrades in year N and N+1 Each ADUO homologation upgrade: a. must only contain components marked with a “ü” in the column “ADUO” in the table of Appendix C4 b. will require the submission of an updated homologation dossier as specified in the Article 1.5 of this Appendix A Power Unit updated to the latest ADUO homologation upgrade specified above: a. must only contain parts belonging to that updated homologation dossier. b. can be introduced from the first Competition following the ADUO grant, in addition to any other specification upgrade otherwise permitted. c. is available to each F1 Team supplied by the PU Manufacturer at the Competition at which it is first introduced with at least one Power Unit of the new Homologation specification. 3.4 Components may be modified in order to comply with an amendment to the published regulations
Open regulation PDF Pages 239 highlighted
View all →

Processed at